Avlink PG-V1 - Manual (Page 8)

7
2.2 Connect PG-V1 to Monitor
ƒ Connect the attached DC adapter cable from PG-V1 to
the power source (outlet).
ƒ Connect the VGA cable from PG-V1 to the Monitor/TV.
ƒ Power on the Monitor/TV.
ƒ Press the power key of PG-V1 for more than 3 seconds to
power on/off the PG-V1.
Caution
Please power off the Monitor/TV before begin the
connection.
Cable
or Twins pair
Monitor/TV