AvMap G6 - Manual (Page 5)

AvMap - 5
Farmnavigator
SD Slot
Connector for
magnetic support
ON -OFF
Reset
Sensor for the
automatic
brightness
control
Connector for
car charger 12 V
Magnetic
support
External GPS
antenna connector
1.3 Mounting
1. Attach the magnetic support the suction cup holder.
2. Mount the suction cup holder on the windshield of
your farm machine. Please reassure that the windshield
is free from grease and wet the suction cup to improve
the adhesion.
3. Connect the 12V power cable to the connector in the
magnetic mount, and then to the cigarette lighter plug
in your vehicle.
4. Connect the cable of the GPS antenna to the 9 pins
Connector coming out of the magnetic support. 5.
Connect the antenna cable with the screw coupling
to the GPS antenna and mount the antenna above the
steering axle. If the hood of your farm machine is not
made of magnetic material (plastic or aluminium etc.)