AvMap Geosat4x4 Quick Start - Manual (Page 11)

11
5. Touch Load button.
Now your files are moved back to the internal memory.
2.6 Transferring Waypoints through NMEA communication to and from Ozi Explorer
If you need to export/import waypoints from your Geosat 4x4 to Ozi explorer during a competition,
there is a faster procedure. You can connect Geosat 4x4 directly to a laptop with Ozi Explorer running
on it through the special Interface serial cable (optional) so that they can communicate through NMEA
protocol. If your PC does not have a serial port, but only USB ports, you can also buy our Serial - USB
cable adapter. To buy optional cables visit www.avmap.it
1. Switch Geosat 4x4 on and connect the serial cable to the Geosat 4x4 serial port, and to the PC serial
port .
2. Open Ozi Explorer and click on configuration
3. Set GPS Make = “NMEA only” , and GPS symbol = “Default”, Control also in the COM section
if the right PC port is selected, then click Save to save the settings.
4. Set the Geosat 4x4 in 4x4 mode ( par. 2.1)
From Geosat 4x4 to Ozi Explorer:
In the Geosat 4x4 main menu, touch the 4x4 button and then touch on Contacts. 1.
In the Contacts Page select the desired folder 2.
Click on “GPS- only NMEA” in the upper of Ozi Explorer and select Get Waypoint from GPS 3.
Touch the SEND button to transfer the waypoints to the PC. 4.
To send waypoints from Ozi Explorer to the Geosat 4x4, select Send Waypoints
From Ozi Explorer to Geosat 4x4:
Click on “GPS- only NMEA” in the upper of Ozi Explorer and select Send Waypoint to GPS
3.Technical specifications
Hardware
• Dimensions (139.7 x 100 x 36) mm
• Weight 390 g
• 5” LCD TFT Touchscreen
• Brightness 450 nit
• Contrast 250:1
• Resolution 320 x 240 px
• Number of colours 65536
• Manual or automatic brightness control
• Built-in Sirf III GPS receiver 20 channels
• Built-in rechargeable Li-Ion battery
• Secure Digital memory card
• Processor Arm9 300 MHz
• RAM 32 MB