AvMap Geosat 4 TRAVEL Europe - Manual (Page 47)

4
updates available from the support section of
www.avmap.it.
How to install the drivers on your PC:
If this is the first time that you have updated
the software, you first need to register your
product on the URL www.avmap.it under the
Support section.
Select Product registration and fill out all the
required fields. After completing the form,
you will receive an email with your login and
password details.
After registering the product, select Faqs and
Download, and choose from the drop menu
the model of the navigator to be updated,
then click on drivers (this is necessary just
the first time you update the software ). In
the drivers page click on download., you will
be asked to enter your login and password
details and then the download will start.
Once the drivers have been saved, launch the
set up (USB_G4T_2_4_Drivers-Setup) and
follow the instructions without connecting
your AvMap Geosat to the PC. Once the
set up is finished, restart your PC. If the
drivers have been correctly installed, they
will be displayed in the Control Panel under
12.1 Updating the Software
The latest software version to update your
Geosat 4 TRAVEL is available, free of charge,
from www.avmap.it. Each software update
is an executable file with an intuitive user
interface that makes the updating operation
easier.
How to check the software version in your
geosat:
To check whether your Geosat 4 TRAVEL
needs to be updated, you need to establish
which software version is pre-loaded on
your device and then visit the www.avmap.
it website to check if it is the latest available
version.
Press the MENU button twice to open the
Main Menu, select About and press the +
button to confirm. The info window details
the software and cartography information.
The software version is indicated in the first
line as V1.xx.xxxR (dd-mm-yy), while the
chart version is indicated in the second to last
line as T-EUQ-xxx.xx
The next step is to check whether there are
12. Updating the Software
and the Map
the navigator. The brightness of the display
is varies according to the environment
brightness, and when there is no light, the
colour palette is automatically changed to
favour an optimal and safer view.
11.15 Volume
The Geosat 4 TRAVEL is equipped with a
speaker mounted at the back of the unit.
To adjust the volume:
1. Press the FIND button and hold for at least
3 seconds.
2. Adjust the volume with the JOYSTICK.
3. Press FIND to quickly vary the volume.