AvMap GeoPilot II - Manual (Page 21)

21
2.7 dATA enTrY
Information is keyed into the Geopilot II when editing a Waypoint, entering a Flight Plan, using the
calculator and searching the Database. When the field is highlighted:
- Enter or edit data by pressing up/down cursor key to step through the available characters until
the desired character is displayed.
- Press right cursor key to move the cursor to the right.
- Use left cursor key to move the cursor to the left.
Some pilot-entered data requires either a +, - or a hemisphere identification:
- Move the cursor over the displayed symbol and press up/down cursor key until the desired
symbol appears.
- Press ‘ENT’ to continue to the next line or to return to the previous menu.