Awntech Chicago RC44 User Manual
Page 2
• Please read the instructions fully before assembly.
• This awning must be fully assembled prior to installing it onto
the wall.
STEP 1: Separate all of the parts by part number so they will be easy to
assemble.
Parts list
Center Ribs & Wall
Supports
Size Plates Ribs
Top
Bar
Front
Bar
Left
Projection
Curve
Right
Projection
Curve
RC22
CC33
CC44
3 1 7
1
1
0 0 0
4 2 8 1 1
1
1
0 0 0
5 2 8 1 1
1
1
0 0 0
6 2 8 1
1
1
1 1/1 0 0
7 2 8 1
1
1
1 1/1 0 0
8 2 8 1
1
1
1 2/2
1/1 0
9 2 8 1
1
1
1 2/2
1/1 0
10 2 8 1
1
1
1
3/3 3/3 1/1
11 2 8 1
1
1
1
3/3 3/3 1/1
12 2 8 1
1
1
1
3/3 3/3 1/1
13 2 8 1
1
1
1
5/5 3/3 3/3
14 2 8 1
1
1
1
5/5 3/3 3/3
15 2 8 1
1
1
1
5/5 5/5 3/3
16 2 8 1
1
1
1
5/5 5/5 3/3
17 2 8 1
1
1
1
5/5 5/5 5/5
18 2 8 1
1
1
1
7/7 5/5 5/5
19 2 8 1
1
1
1
7/7 5/5 5/5
Center Ribs and Wall Supports are for larger size awnings. Example: RC22-6 size
will have additional Center Rib and a Wall Support
Tools Required: Electrical Drill, ¼” Nut Driver Bit, Full Socket Set, Full set of Steel and Masonry
Bits, Tape Measure, Safety Glasses, 4’ Level, A Safe Ladder, #2 Pencil
YOU MAY ALSO NEED A HELPER DEPENDING ON THE SIZE, WEIGHT, LENGTH AND
HEIGHT OF THE AWNING
NOTE: YOU WILL FIND THAT THE FITTINGS HAVE BEEN PRE-INSTALLED, AS WE HAVE
PRE-ASSEMBLED AND INSPECTED IT FOR YOU IN THE FACTORY.
ASSEMBLING THE FRAME
STEP 2: Connect Rib1 – Rib4 to the Left Plate
STEP 3: Connect Rib5 – Rib8 to the Right Plate
STEP 4: Assemble Left Plate and Right Plate by connecting Top Bar (TB) in between
them and make sure that the Velcro on the Top Bar, Rib1 and Rib8 are facing you