Chamberlain LIFTMASTER MUGAPLM - Manual (Page 5)

Enter Master PIN Number on MUGAPLM:
? ? ? ?
0 6
Enter one of the following volume levels:
1 2 3
Enter Master PIN Number on MUGAPLM:
? ? ? ?
0 7
OR OR
1 2 3 OR OR
Enter one of the following sensitivity levels:
5
When it is dark, the panel will light when it detects
movement (up to 5') or when a button is pressed (This
feature is disabled in Power-save Mode).
Enter Master PIN Number on MUGAPLM:
? ? ? ?
0 8
1 2 3 OR OR
Enter one of the following brightness levels:
Default setting is 2.
Speaker Volume
“BEEP”
Microphone Sensitivity
“BEEP”
Keypad Brightness
“BEEP”
Enter Master PIN Number on MUGAPLM:
? ? ? ?
0 9
# # #
Enter new Master PIN Number:
Change Master PIN Number
“BEEP”
“BEEP”
Enter Master PIN Number on MUGAPLM:
? ? ? ?
7
# # #
Enter PIN number you want to remove:
A triple beep indicates a PIN Number has been entered
that does not exist. The Master PIN Number cannot be
deleted.
A temporary PIN Number can be used only once within
a 24 hour period.
Enter Master PIN Number on MUGAPLM:
? ? ? ?
5 1
Enter temporary PIN Number:
If the temporary PIN Number applies only to a certain
GCU, enter the PIN Number followed by the GCU
Identity (1-4). The result will be a five digit PIN number
(example: 12341).
Erasing PIN Numbers
“BEEP”
“BEEP” “BEEP”
Temporary PIN Numbers
“BEEP”
“BEEP”
Operation & Features
The MUGAPLM can support up to 99 PIN Numbers.
Enter Master PIN Number on MUGAPLM:
? ? ? ?
9
Enter new PIN Number:
If the new PIN Number applies only to a certain GCU,
enter the PIN Number followed by the GCU Identity
(1-4). The result will be a five digit PIN Number
(example: 12341).
Adding PIN Numbers
“BEEP”
“BEEP”
Default setting is 2.
Default setting is 2.