Cuisinart DLC-2009CHB - Manual (Page 3)

IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart ® Premier
Series 9-Cup Food Processor, and the
standard parts for it: Work bowl, work bowl
cover, large and small pushers, dough blade,
metal chopping/mixing blade, slicing disc,
shredding disc, detachable disc stem for
discs, spatula, How-to DVD and recipe/
instruction book.
CAUTION: THE CUTTING TOOLS HAVE
VERY SHARP EDGES. To avoid injury when
unpacking the parts, please follow these
instructions.
1. Place the box on a low table or on the
fl oor next to the kitchen counter or
table where you intend to keep the food
processor. Be sure the box is right side
up.
2. Remove the cardboard insert. You will
see a rectangular block of plastic foam
that holds the processor parts, each
fi tted into a cavity in the foam.
3. The detachable disc stem for the discs (A)
sits in a cavity in one corner of the foam
block. Remove this fi rst.
4. The pusher assembly, with large and
small pushers, (B) sits in the adjacent
cavity. Remove this next.
5. The dough blade (C) rests in a cavity
on the opposite side of the foam block.
Remove it from the foam.
6. The plastic spatula (D) is on one long side
of the foam block. Remove it next.
7. The slicing disc (E) is on the edge of one
of the long sides of the foam block; the
shredding disc (F) is on the other side.
Slide them out WITH GREAT CARE; THE
BLADES ARE VERY SHARP.
8. Lift out the DVD from its space on one
side of the foam block.
9. Lift out the foam block.
10. Remove the instruction/recipe book.
11. The housing base with work bowl, metal
blade and cover are at the bottom of the
box. The metal blade is loose in the work
bowl beneath a foam insert. Do not reach
into feed tube. Do not turn over work
bowl without fi rst removing metal blade.
Remove work bowl cover by turning it
clockwise and lifting.
12. Remove the base and bowl together by
grasping the plastic bowl at the top with
both hands and lifting the bowl straight
up. Do not rotate the bowl clockwise
on the base. This will cause the bowl to
separate from the base.
13. Place the food processor on the counter
or table. Remove foam cylinder insert
from top of metal chopping blade. Read
the instructions thoroughly before using
the machine.
14. Save the shipping cartons and plastic
foam blocks. You will fi nd them very
useful if you need to repack the processor
for moving or other shipment.
Please watch the enclosed How-to DVD
before using the food processor.
NOTE: Remember to return your com-
pleted product registration card with all
information carefully fi lled out.
WHEN REMOVING BLADE: CAREFULLY
REMOVE THE METAL BLADE BY GRASP-
ING THE CENTER WHITE HUB AND LIFT-
ING IT STRAIGHT UP. NEVER TOUCH THE
BLADES, AS THEY ARE RAZOR SHARP.
3