Setting dual watch, Turning roger beep off and on, Turning keystroke tones off and on – Cobra Electronics PR330 User Manual

Page 7

Advertising
background image

3. The radio will continue to scan all memory

locations and stop if an incoming
transmission is detected. The unit will
remain on that location for 10 seconds.
During that time you can:

a) Press and hold the TALK button and
talk. The radio will remain on that
memory location channel and return to
Standby mode.

b) Push the
CHANNEL SELECT
button up or down
to resume scanning
memory locations.
c) Press the MODE
button to proceed to other functions.

If you do not press any button within
10 seconds, the radio will automatically
resume scanning memory locations.

Setting Dual Watch

Dual watch allows you to simultaneously
monitor any two channels/privacy codes
you select. To program Dual Watch:
1. Select the first channel and privacy code

you wish to monitor. (To review, see
pages 3-4.)

2. Press the MODE button until the Dual

Watch icon flashes.

3. Push the CHANNEL

SELECT button up or
down to select the
second channel you
wish to monitor.

4. Press the MODE

button. The privacy code flashes.

5. Push the CHANNEL SELECT button up or

down to select the second privacy code.

6. Press and release the LOCK button to store

the second channel/
privacy code and
engage Dual Watch.

7. To terminate Dual

Watch and return to
normal Standby
mode, press and release the LOCK, TALK or
MODE button.

O P E R AT I O N

ENGLISH

O P E R AT I O N

ENGLISH

Turning Roger Beep
Off and On

With Roger Beep turned on, your listener
will hear an audible tone when you release
the TALK button. To change Roger Beep mode:
1. Press the MODE button until the Roger

Beep icon flashes and the current setting
(“on” or “off”) is displayed.

2. Push the CHANNEL SELECT button up or

down to turn Roger Beep on or off.

3. To enter the new setting you can press and

release the LOCK button, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.

Turning Keystroke Tones
Off and On

With Keystroke Tones turned on, your unit will
sound beeps each time you press a button or
change a setting. To change Keystroke Tones
mode:
1. Press the MODE button until the Keystroke

tones icon flashes and the current setting
(“on” or “off”) is displayed.

2. Push the CHANNEL SELECT button up or

down to turn Keystroke Tones on or off.

3. To enter the new setting you can press and

release the LOCK button, or press no
buttons for 15 seconds. Press the MODE
button to enter the new setting and
proceed to other functions.

12

MODE button

CHANNEL UP

CHANNEL DOWN

MODE button

11

MODE button

MODE button

CHANNEL SELECT

button

CHANNEL SELECT

button

TALK button

LOCK

button

MODE

button

LOCK

button

MODE

button

LOCK

button

CHANNEL UP

CHANNEL DOWN

Advertising