BASO BGQ15HAA-1 - Manual (Page 17)

BGQ15HAA-1 Retrofit Spark Ignition System Installation Instructions 17
Technical Specifications
Product BGD278JBE-20BCGD Gas Valve
Maximum Operating
Pressure
0.5 psi (35 mbar)
Permissible Ambient
(Surface) Temperature
-20 to 175
°F (-29 to 79°C)
Valve Body Aluminum
Electrical Rating 25 VAC, 60 Hz, 0.42A, 10.5 VA per coil
Electrical Connection 3-Tab Solenoid Coil: 2 x 1/4 in. (6.35 mm) + 1/4 in. (6.35 mm) Earth Ground
Regulator Adjustment
Range
3 to 6 in. W.C. (7.5 to 15 mbar)
Inlet Pipe Size 1/2 in. NPT
Outlet Pipe Size 3/4 in. NPT
Wiring Connections Wire Harness Pre-Wired
Coil Insulation Class Class F
Type of Gas Natural
Agency Listing CSA (AGA/CGA) Certification Number 229521-1656041
Specification Standard ANSI Z21.78, CSA 6.20
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Published in U.S.A.