BASO BGA158 Series CE Approved Class A - Manual (Page 6)

6 BGA158 Series CE Approved Class A Shutoff Gas Valve Installation Instructions
Technical Data
Product BGA158 Series CE Approved Class A Shutoff Gas Valve
Types of Gas 2nd (Natural Gas) or 3rd (LP Gas) Family Gases
Permissible Ambient
(Surface) Temperature -29 to 79°C (-20 to 175°F)
Electrical Ratings 25 VAC, 50/60 Hz, 0.595A,
120 VAC, 50/60 Hz, 0.13A
240 VAC, 50/60 Hz, 0.063A
12 VDC, 1.0A
25 VDC, 0.675A
Maximum Operating
Pressure North America:
Europe: 2 psi
138 mbar
Reverse Pressure Ratings 150 mbar (15 kPa) (60 in. W.C.); Class A (EN 161)
Inlet Pipe Size 1/8, 1/4, 3/8, or 1/2 NPT, 1/8, 1/4, 3/8, or 1/2 BSPP (Thread ISO 7-Rp)
Outlet Pipe Size 1/8, 1/4, 3/8, or 1/2 NPT, 1/8, 1/4, 3/8, or 1/2 BSPP (Thread ISO 7-Rp)
Valve Torsion Group Group 2 (EN 161)
Pressure Connection 1/8 NPT left, right, left and right, left and bottom, right and bottom, or bottom
1/8 BSPP (Thread ISO 7-Rp) left, right, left and right, left and bottom, right and bottom, or bottom
Dirt Strainer 0.9 mm (0.036”) Mesh
Operating Time Rating 100% Continuous
Valve Timings Closing Time
Opening Time
Dead Time <1 Second
<1 Second
<1 Second
Power Ratings 15 VA per Coil (except 25 VDC, 17 VA)
Electrical Connections 3-Tab Solenoid Coil
2-Tab Solenoid Coil 2 x 6.35 mm (1/4 in.) Tabs + 6.35 mm (1/4 in.) Earth Ground Tab
2 x 6.35 mm (1/4 in.) Tabs
Coil Insulation Class Class F
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional).
Bulk Pack Quantity 80 per carton
Bulk Pack Weight 36 kg (79 lb) per carton
Agency Listings CSA (AGA/CGA) Certificate Number 229521-1656058
EC Type Examination Certificate Number EC-86/11/040
UL Recognized File Number MH5939
Specification Standards EN 161
Standards Complying with EMC Directive
Standards Complying with Low Voltage Directive
ANSI Standards Z21.21
Canadian Standards CAN1-6.5
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the BGA158 Series CE Approved Class A Shutoff Gas Valve Product Bulletin (BASO-PB-BGA158) for necessary information on
operating and performance specifications of this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Printed in U.S.A.