BASO BGA158 Series CE Approved Class B - Manual (Page 5)

BGA158 Series CE Approved Class B Shutoff Gas Valve Installation Instructions 5
Repairs and Replacement
Table 1: Replacement Solenoid Coil
Part Number Description
RSDA95A-12 12 VDC; 2-tab 10.5 VA Coil
RSDA95A-25
25 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
25 VDC; 3-tab 11.5 VA Coil
RSDA95A-120 120 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
RSDA95A-240 240 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
!
CAUTION: Risk of Electric Shock.
Disconnect power supply before making electrical
connections to avoid electric shock.
!
WARNING: Risk of Explosion or Fire.
Shut off the gas supply at the main manual shutoff
valve before installing or servicing the BGA158.
Failure to shut off the gas supply can result in the
release of gas during installation or servicing, which
can lead to an explosion or fire, and may result in
severe personal injury or death.
!
WARNING: Risk of Explosion, Fire, or
Electric Shock. Label all wires before they are
disconnected when replacing or servicing the
BGA158. Wiring errors can cause improper or
dangerous operation and may result in an explosion,
fire, or electric shock leading to severe personal
injury or death.
Field repairs must not be made to the BGA158 valve.
Any attempt to repair this assembly voids the
manufacturer’s warranty. For a replacement valve,
contact the original equipment manufacturer or the
nearest BASO Gas Products distributor.