Behlen 80110640YEL - Manual (Page 8)

Replacing Rake Tines
•
To service the Landscape Rake when
attached to the tractor, it must be blocked up
off the ground.
•
Place two blocks under the tine bar to rest
securely on the blocks.
• Remove the nuts and bolts from the damaged
teeth. Loosen the other bolts holding the
same tooth support plate. Removed damaged
tine(s).
•
Insert the new tine and secure with the bolts
and hex nut previously removed.
Eye protection should be worn when
removing or installing damaged rake teeth.
Transportation
Guidelines
When transporting unit, it should be lifted as
high at the tractor will allow being sure the unit is
clear of the ground when transporting.
Care should be taken that at least 20% of tractor
weight should be on the front tires. A safe speed
should be maintained during transportation.
Tractor weight ballast may be needed to even
out weight to maintain proper steering.
Do NOT lower unit to pavement, blacktop or
gravel road while transporting. Damage to the
unit can occur.
When transporting on roadways, always use a
safety sign, and drive in a manner to allow other
vehicles to pass you safely.
When traveling on public roads whether at
night or during the day, use accessory lights
and devices for adequate warning to
operators of other vehicles. Comply with all
federal, state, and local laws.
CLEANING AND
STORAGE
AFTER EACH USE
•
Remove large debris such as clumps of dirt,
grass, crop residue, etc. from implement.
• Inspect implement and replace worn or
damaged parts
• Replace and safety decals that are missing or
not readable.
BEFORE EXTENDED STORAGE
• Follow cleaning from above.
• Wash Landscape Rake using low-pressure
water spray.
•
Be careful when spraying near scratched or
torn safety decals or near edges of decals as
water spray can peel decals off surface.
Spraying near chipped or scratched paint can
also cause paint to peel.
• Inspect machine for worn or damaged parts,
replace any missing safety stickers.
• Sand down scratches and edges where paint
is missing and repaint to prevent rust.
• Store the unit in a shed or under tarpaulin to
protect from the weather. The tines and tires
should be resting on boards or some other
object, keep out of soil when storing.
• Store in clean, dry place away from human
activity or livestock.
WARRANTY
This unit carries a 1 year warranty, with the
exception of wear parts. Dated proof of purchase
required on all claims.
OPERATION & MAINTENANCE INSTRUCTIONS
CAUTION
CAUTION
F-20888 1-20-11