Assembly instructions – Behlen 54150068 User Manual
Page 2
ASSEMBLY INSTRUCTIONS
Units should be wired according to the
ASAE farm wiring recommendations except
where different from local regulations.
N0TE: The use of the riser pipe as the
grounding rod is not recommended. This is
due to the extensive use of plastic pipe on
the farmsteads and the unknown grounding
properties of existing pipe on the site.
WARNING: Compliance with the national
electric code (CSA in Canada) and local
electrical codes must be made and
maintained when installing the drinker.
Failure to comply and maintain the drinker to
code could result in loss of livestock, severe
personal injury, or even death.
Adjustment:
Adjust the float to maintain a water level in the
trough of 1" to 1½" below the top of the trough.
Warranties:
All Behlen Country Electric Drinkers carry a 5
year limited warranty on the body and a 1 year
limited warranty on valves and controls.
40-1/2”
81”
21”
DRINKER MOUNTING LOCATION FOR PFL-H
18-1/2”
16
”
21
”
B
A
DRINKER MOUNTING LOCATION
FOR PCHE AND PCHI
DRINKER MOUNTING LOCATION FOR
PCPE, PCPI, PCSE, PCSI, and XCPE
F-19907-3
Rev. 1-25-08 8-15-02