Touchpanel interface crestron isys™ tps-tpi – Crestron electronic TPS-TPI User Manual

Page 18

Advertising
background image

Touchpanel Interface

Crestron Isys™ TPS-TPI

The characteristics of the input signal are displayed centrally at the bottom of the
RGB Menu. For example, in the above illustration, the input signal has a resolution
of 1024 x 768 with a frequency of 60.9 KHz (horizontal) and 76.1 Hz (vertical). If
the input signal has the same video (plus or minus some noise) as one of the presets,
The Detected Preset box shows the value. For the sake of this procedure, Detected
Preset
16 is shown as an example. If there is no preset detected, the box shows 0 as
the value.

The TPS-TPI is capable of storing 16 VGA formats; the panel is factory set with the
presets empty. To assign a format to a preset, complete the following steps:

1. Select a preset button (numbered 1 through 16). For the sake of this

procedure, select 11.

2. Select

the

Display RGB button at the top of the RGB Menu to display

the screen after this step.

RGB Controls (Vertical Lines Portray RGB Sample)

3. While viewing the sample of the input signal, use the arrow buttons

around the Center button and then the other arrow buttons to position
and compress/expand the sample so that it fills the entire screen.

NOTE: The Center button only needs to be used if the sample disappears from the
screen while making adjustments in step 3.

4. While viewing the sample of the input signal, use the Phase Rev and

Phase Fwd buttons to adjust the timing of the sample.

5. If necessary, select the More Controls button to show additional

controls for RGB.

6. In the box beneath the characteristics of the input signal, confirm that

the Selected Preset number matches the one selected in step 1.

If 0 appears, no preset was selected in step 1. To correct, perform the
following steps (in sequence): 8, 1, and 2. Then continue with the next
step.

7. If visually satisfied with the sample, select the Save Preset button.

Otherwise use the buttons on the screen to make additional
adjustments.

8. At any time, the RGB Menu button can be selected to return to the

RGB Menu.

14

Touchpanel Interface: Crestron Isys™ TPS-TPI

Operations Guide - DOC. 5855

Advertising