BlackVue DR300G - Manual (Page 30)

28
Other Information
Installing the BlackVue Software
1.
Insert the micro SD card(accessory)
into the PC. ( See page 16)
2.
Double-click the ‘BlackVueSetup(g)_E.
exe’ file on the Micro SD card.
3.
Follow the directions presented by
the Setup program until you finish
the installation.
4.
Check that a shortcut to the
BlackVue Software is created on the
Windows Desktop.
X N Double-clickXtheXshortcutXtoXtheX
BlackVueXSoftwareXtoXrunXtheX
program.
] If the version of the firmware is higher than that of the software,
the recording file will not be played
•X CheckXtheXversionsXofXtheXsoftwareXandXtheX
firmware.X
•X IfXtheXversionXofXtheXsoftwareXisXlower,XinstallX
theXsoftwareXnewly.X