Curtis TV2010 - Manual (Page 11)

Dynamic Standard
Mild User
Use DSP button to know the current channel number
Press DSP button to display the current TV state. If in TV program 12 ST SAP viewing, then it will
display the current channel number, sound mode and remaining sleep time (if set).
To scan programs
Press SCAN button, the TV set will scan the channels from current channel to higher channels one
by one, every program will be displayed for about one second and then go on scanning. Press
SCAN button again, the screen will settle at the current scanned channel.
PICTURE ADJUSTMENT
To select the picture mode
You can select the picture quality instantly among three
preset modes and one user-set mode.
Press │P│ button to select the desired picture quality.
Standard, Dynamic, Mild and User (user-set) can be
selected cyclically.
Mode Picture quality
Standard Display normal pictures
Dynamic Display dynamic pictures
Mild Display soft pictures
User The picture quality you set
Picture adjustment
1. Press MENU button to display the Picture
menu.
2. Press CH+ or CH- to select item.
3. Press V+ or V- to adjust the level; or you can
also make use of button to adjust picture.
Every time you press button, one picture
adjustment menu bar will appear. Then make
use of V+ or V- button to adjust the level.
4. To exit the menu, press the DSP button
Item V- V+
Brightness darker lighter
Contrast weaker stronger
Color paler deeper
Sharpness softer sharper
*Tint purplish greenish
Notes:
The adjusted level is stored in the User position.