Boekel Scientific 270200 Orbital Shaker - Manual (Page 7)

4. Operation
(cont’d)
4.8 If required, there is an opportunity during the operation to reset the time by pressing the
RUN/STOP TIME button (4) twice (first time to stop the timer, second time to start it
from zero).
4.9 At any time the operation can be stopped by pressing the RUN/STOP-RPM button (3).
4.10 To reset the program from the beginning, depress the RUN/STOP-RPM key for 3-4
seconds. Secondly, depress the RUN/STOP-TIME key for 3-4 seconds. At this point, your
program is set back to zero and can be re-programmed.
N2400303, Feb. 2007, Rev. 0
Page 7
270300
Operating Instructions