BoomChair Stealth - 1st Generation - Standard - Manual (Page 4)

4
Step 1: Using the console’s custom RCA cord, plug yellow
composite video cable from game console into video input of TV. (Fig. 1)
Step 2: Plug Red/White RCA cord from game console into RCA INPUT (E) of BoomChair™. (Fig. 2)
Step 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console.
Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler (3c).
Step 3: Connect other end of RCA cord (3b) into RCA INPUT (E) of BoomChair®.
Note: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out.
Note: It may be necessary to extend your BoomChair™ further away from your TV or console. Here’s how. (Fig.3)
BASS/TREBLE
+
VOLUME
+ POWER
INPUT OUTPUT IN
3c 3b
GAME CONSOLE TV BOOMCHAIR™
Fig. 1 Fig. 2
Cable supplied with game console
Fig. 3
AUDIO COUPLER (3c)
ASSEMBLY INSTRUCTIONS
Step 1: Secure the SWIVEL/TILT KNOB UNIT to the bottom of chair
using 4 screws and the provided allen wrench. Make sure knob is on
the front side of the chair as pictured.
Step 2: Insert the pole portion into the metal base and apply pressure
or carefully sit in chair to lock in place.
Step 3: Make sure chair is in upright position and secure the hook and
loop fasters on back of chair (part 5)
Step 4: Use allen wrench to attach armrests using 4 screws each.
Step 5: Insert headrest by squeezing button on top of back.
Step 6: Insert adapter cord (2) into power receptacle (4).
Step 7: Plug adapter (2) into wall outlet. *
Step 8: Turn Boomchair™ on by turning Power knob (C) clockwise.
STEP 1
STEP 6
*CAUTION: Use only provided adaptor! Different voltage may cause permanent damage.
CONNECTING TO GAME CONSOLES
STEP 4
Step 1: Unscrew battery compartment on bottom of Boomchair® seat.
Step 2: Insert 8 “D” cell batteries (not included).
Step 3: Close battery compartment securely with screws.
Step 4: Turn Boomchair™ on by turning Power knob (B) clockwise.
(OPTIONAL) BATTERY POWER SUPPLY