BoomChair Stealth - 2nd Generation - Manual (Page 4)

4
Step 1: Secure the SWIVEL/TILT KNOB UNIT (10) to the bottom of chair using 4 SCREWS (12) and the provided ALLEN
WRENCH (13). Make sure knob is on the front side of the chair as pictured.
Step 2: Secure the seat back using attached HOOK & LOOK FASTENER (6).
Step 3: Insert the POLE (10) into the METAL BASE (11) and carefully sit in chair to lock in place.
Step 4: Use ALLEN WRENCH (13) to attach PADDED ARMRESTS (5) using 4 SCREWS (12) each.
Step 5: Insert ADJUSTABLE HEADREST (3) into BOOMCHAIR ® (1).
Step 6: Insert 12V POWER SUPPLY ADAPTOR (8) into POWER RECEPTACLE (7).
Step 7: Plug 12V POWER ADAPTOR (8) into power outlet. *
Step 8: Turn BOOMCHAIR ® (1) on by turning POWER SWITCH/VOLUME CONTROL clockwise.
ASSEMBLY INSTRUCTIONS
*CAUTION: Use only provided adaptor! Different voltage may cause permanent damage.
8
STEP 1
STEP 6 & 7
7
STEP 4