1 system controls – Buffalo Filter PlumeSafe Turbo User Manual
Page 11
Buffalo Filter Turbo Auto-Sense™ Operator’s Manual: Page 10
2.1 System Controls
The Turbo Auto-Sense™ LCD control display is user-friendly and completely interactive, allowing
for easy to understand use (as displayed on the LCD screen).
Key Pad Diagram:
The following items are important for the operation of your system
POWER ON/OFF
The main power switch is located on the rear panel of your smoke evacuator. This switch
completely enables and disables the main power.
When the unit is powered on the
following LCD screen will appear.
After inserting a filter a screen will
flash for a few seconds to indicate
filter type and original life.
Next, the standard screen will appear
which displays information regarding
the unit’s current activity.
MOTOR ON/OFF
The Motor ON/OFF button is located on the LCD key pad (Figure 1). This button turns the motor
(for suction) on and off.
SUCTION CONTROL
The amount of suction may be adjusted using the UP or DOWN arrow buttons located on the key
pad (Figure 1). It is recommended that you select the lowest suction setting that effectively clears
the operative field of surgical smoke.
Operating Instructions
Section 2.0