Buick 2011 Enclave - Manual (Page 127)

Black plate (9,1) Buick Enclave Owner Manual - 2011
Instruments and Controls 5-9
If the radio clock and analog clock
are not synchronized. Use the
procedure below to synchronize
both clocks.
Setting the Digital Radio Clock
Adjusting the Time and Date
1. Turn the ignition key to ACC/
ACCESSORY or ON/RUN, then
press
O
, to turn the radio on.
2. Press G to display HR, MIN,
MM, DD, YYYY (hour, minute,
month, day, and year).
3. Press the pushbutton located
under any one of the labels to be
changed.
4. To increase the time or date, do
one of the following:
. Press the pushbutton below
the selected label.
. Press
¨
SEEK.
. Press \ FWD.
. Turn
f
clockwise.
5. To decrease the time or date, do
one of the following:
. Press © SEEK.
. Press
s
REV.
. Turn
f
counter‐clockwise.
Changing the Time and Date
Display Setting
To change the time default setting
from 12 hour to 24 hour or to
change the date default display
setting from month/day/year to day/
month/year:
1. Press
G
and then the
pushbutton located under the
forward arrow that displays on
the radio screen until the time
12H (hour) and 24H (hour), and
the date MM/DD (month and
day) and DD/MM (day and
month) displays.
2. Press the pushbutton located
under the desired option.
3. Press
G
again to apply the
selected default, or let the
screen time out.