Buick 2005 Park Avenue - Manual (Page 165)

See the following steps for personalization
programming instructions.
1. Turn the ignition on and keep the transaxle in
PARK (P).
2. Inform the DIC which driver you are by pressing the
unlock button on your transmitter or the appropriate
MEMORY button.
3. Press and hold the ENG/MET button for five
seconds. WELCOME TO BUICK OPTION
FEATURE will appear in the display.
The next display will be your driver number and the
message ARMREST BUTTON CHANGES
DRIVER #. Follow the instructions in the display.
You are now in the selection mode and the DIC
is ready to program your personal choices
in memory.
The selections you make for the personal choice
features will be saved after the display reads
FEATURE OPTION SELECTION DONE.
Each feature that can be personalized will appear in
the display. Once you have made a selection for
a feature, the DIC will move on to the next personal
choice feature.
4. Scroll through the following messages and
feature options:
• PARALLEL PARK – OFF/ON
• AUTO DOOR LOCKS – OFF/ON
• UNLOCK IN PARK – OFF/ON
• WHICH DOORS – ALL/DRIVER
• DELAYED LOCKING – OFF/ON
• LOCK FEEDBACK – OFF/ON
• LOCK FEEDBACK – LIGHTS/LIGHTS + HORN
• UNLOCK FEEDBACK – OFF/LIGHTS
• PERIMETER LIGHTS – OFF/ON
• SEAT RECALL – OFF/ON
• RECALL POSITION – MEMORY/EXIT
• WINDOW LOCKOUT – ALL PASS/REAR
If you would like to exit the selection mode without
moving through each of the personal choice features,
simply press a different button on the DIC or turn off the
ignition. However, personal choices you made may
not be retained.
3-51