Buick 2004 Park Avenue - Manual (Page 185)

3 r (Reverse): Press this pushbutton to reverse
quickly within the tape. The radio will play while the tape
reverses. Press the pushbutton again to return to
playing speed.
4 [ (Forward): Press this pushbutton to advance
quickly within the tape. The radio will play while the tape
advances. Press the pushbutton again to return to
playing speed.
5 SIDE: Press this pushbutton to play the other side of
the tape.
6 RAND (Dolby ® ): Press this pushbutton to reduce
background noise. The double-D symbol will appear on
the display.
Dolby ® Noise Reduction is manufactured under a
license from Dolby ® Laboratories Licensing Corporation.
Dolby ® and the double-D symbol are trademarks of
Dolby ® Laboratories Licensing Corporation.
AM-FM: Press this button to listen to the radio when a
cassette tape is playing. The inactive tape will remain
safely inside the radio for future listening.
SOURCE: Press this button to play a cassette tape or
a CD when listening to the radio. TAPE SIDE and
an arrow will appear on the display. If this button is
pressed again, the system will go to CD play; CD PLAY
will appear on the display.
w
SEEK
x
: Press the up or the down arrow to go to
the next or to the previous selection on the tape.
Your tape must have at least three seconds of silence
between each selection for seek to work.
EJECT: Press this button, located next to the cassette
tape slot, to stop a tape when it is playing and to remove
a tape when it is not playing. Eject may be activated with
the radio off. Cassettes may be loaded with the ignition
and radio off if this button is pressed first.
3-67