CAMCORP Blower Package with M-D Pneumatics Blower - Manual (Page 15)

TABLE OF CONTENTS
SAFETY INSTRUCTIONS & WARNING TAGS 2
SAFETY PRECAUTIONS 3
INTRODUCTION 4
OPERATING DATA 4
INSTALLATION 5
LUBRICATION & OIL RESERVOIR CAPACITIES 6
FLOW CONFIGURATION 6
TROUBLESHOOTING 8
RECOMMENDED SHUTDOWN PROCEDURE / FLOW DIRECTION BY ROTATION 9
DISASSEMBLY & INSPECTION 10
ASSEMBLY 11
SPECIAL TOOL DRAWINGS - MODELS 4500 / 4600 13
SPECIAL TOOL DRAWINGS - MODEL 6000 14
MAINTENANCE & SERVICE SPECIFICATIONS SHEET 15
MAXIMUM OPERATING LIMITS 15
CUTAWAY VIEW AND PARTS LIST - MODELS 4504, 4506, 4509, 4512 16-17
CUTAWAY VIEW AND PARTS LIST - MODELS 4604, 4606, 4609, 4612 18-19
CUTAWAY VIEW AND PARTS LIST - MODELS 6012, 6016, 6024 20-21
WARRANTY STATEMENT 22
SECTION PAGE
PREVENTATIVE MAINTENANCE / STARTUP CHECKLIST 7
SAFETY PRECAUTIONS
For equipment covered specifically or indirectly in this instruction book, it is important that all personnel observe safety
precautions to minimize the chances of injury. Among many considerations, the following should particularly be noted:
• Blower casing and associated piping or accessories may become hot enough to cause major skin burns on contact.
• Internal and external rotating parts of the blower and driving equipment can produce serious physical injuries. Do not
reach into any opening in the blower while it is operating, or while subject to accidental starting. Cover external moving
parts with adequate guards.
• Disconnect power before doing any work, and avoid bypassing or rendering inoperative any safety or protective
devices.
• If blower is operated with piping disconnected, place a strong, coarse screen over the inlet and avoid standing in
discharge air stream.
• Avoid extended exposure in close proximity to machinery with high intensity noise levels.
• Use proper care and good procedures in handling, lifting, installing, operating, and maintaining the equipment.
• Other potential hazards to safety may also be associated with operation of this equipment. All personnel working in or
passing through the area should be warned by signs and trained to exercise adequate general safety precautions
.
• Hearing protection may be required depending on silencing capabilities.
IMPORTANT
In order to assure you of the full benefits of our product warranty, please complete, tear out and
return the warranty registration card located on the back cover of this manual, or you can visit our
product registration web page at http://pneumatics.tuthill.com/product_registration
3