CEI 485 ULTRAK - Manual (Page 2)

- Depress D to recall 1st Lap data (memory can be recalled
anytime when the chronograph is either running or stopped).
- Depress D again to recall the 2nd Lap data.
- Depress D again to recall the stopped time.
- At any time during the RECALL mode ....
- Depress A will display the average (AV) Lap time of the Laps
traversed.
Remarks: if lap counter is > 999 or either Lap/aplit is grater than
9H 59M 59.99S, the AV information will be disabled, AV- - - - - - -
will be displayed.
2
B
- Depress B will display the slowest (SL) Lap time of the Laps
traversed.
- Another depression of the C button will return the chrono to the
stopped status. (Depression of C at any time during recall mode
serves the same purpose.) Depress A to restart counting or B to
reset all memories.
Remarks: the stopwtch can recall the last lap and lap data
entered before the memory capacity used up.
- Depress A to stop counting.
Remarks: make sure the button is unlocked before the operation.
- Depress B will display the fastest (FS) Lap time of the laps
traversed. Repeated depression of B will display the fastest and
slowest Lap times alternately.