Champion Power Equipment 41119 - Manual (Page 20)

17
REV 41119-20131212
ENGLISH 41119
SPECIfICATIONS
Engine Specifications
– Model YF182FD-010
– Displacement 338cc
– Type 4-Stroke OHV
– Start Type Recoil
Oil
Use 10W-30 automotive oil.
Oil capacity is up to 1.2 qt. (1.1 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
Generator Specifications
– Model 41119
– Rated Wattage 5400 Watts
– Starting Wattage 6400 Watts
– AC Load 120/240 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 5.9 gallons (22.4 L)
– Gross Weight 167.5 lbs (76 kg)
– Net Weight 156.5 lbs (71 kg)
– Height 25.8 inches (65.5 cm)
– Width 26 inches (66.1 cm)
– Length 29.8 inches (75.7 cm)
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
fuel
Fuel capacity is 5.9 gallons (22.4 L). Use regular
unleaded gasoline with a minimum octane rating of 85
and an ethanol content of less than 10% by volume.
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.