Champion Power Equipment 100104 - Manual (Page 18)

15
REV 100104-20140723
ENGLISH 100104
SPECIfICATIONS
Engine Specifications
– Model YF168FD-2-010
– Displacement 196cc
– Type 4-Stroke OHV
– Start Type Recoil
Generator Specifications
– Model 100104
– Max Running Wattage 3000 Watts
– Starting Wattage 4000 Watts
– AC Load 120 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 3.4 gal. (13 L)
– Gross Weight 105.8 lb. (48 kg)
– Net Weight 99.2 lb. (45 kg)
– Height 19.4 in. (49.4 cm)
– Width 18.1 in. (46.1 cm)
– Length 23.2 in. (59 cm)
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.
Oil
Use 10W-30 automotive oil.
Oil capacity is up to 0.6 qt (0.6 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
fuel
Fuel capacity is 3.4 gallons (13 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
Weather will affect engine oil and engine
performance. Change the type of engine oil used
based on weather conditions to suit the engine
needs.
NOTE