Driving and operating 9-47 – CHEVROLET 2012 Corvette User Manual

Page 269

Advertising
background image

Black plate (47,1)

Chevrolet Corvette Owner Manual - 2012

Driving and Operating

9-47

Using Cruise Control on Hills

How well the cruise control works
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might want to step on the
accelerator pedal to maintain
the vehicle speed. When going
downhill, you might have to brake or
shift to a lower gear to keep the
vehicle's speed down. When the
brakes are applied the cruise control
is disengaged.

Cruise Control in Sport and
Manual Paddle Shift Gear
Selection

When the vehicle is in S (Sport) and
the manual paddle shift controls are
not being used, cruise control
operates in the same manner as
D (Drive).

When the vehicle is in S (Sport) and
the manual paddle shift controls are
being used, cruise control operates
as follows:

.

If cruise control is active and a
gear is selected with the manual
paddle shift controls, the vehicle
speed is maintained in the driver
selected gear and will not
automatically up-shift or
down-shift the transmission
while the driver’s gear selection
is active.

.

If driving in hilly terrain, cruise
control may not be able to
maintain vehicle speed if an
up-shift or down-shift is not
selected by the driver. While
driving on hilly terrain and cruise
control is active with a manual
paddle shift gear selection, the
driver must select the proper
gear for the terrain or select
D (Drive) on the gear range
selector for full automatic
transmission operation.

Ending Cruise Control

.

To disengage cruise control,
step lightly on the brake pedal.
If the vehicle has a manual
transmission, lightly tap the
clutch to end the cruise control
session.

.

To turn off the cruise control
system, move the cruise control
switch to

9

.

When cruise control is disengaged,
the CRUISE DISENGAGED
message displays on the Driver
Information Center (DIC). See
Cruise Control Messages on
page 5‑38
.

Erasing Speed Memory

The cruise control set speed is
erased from memory by moving
the switch to

9

or if the ignition is

turned off.

Advertising