Securing a child restraint in the right front, Seat position (with airbag off switch) -65 – CHEVROLET 2010 Silverado User Manual

Page 107

Advertising
background image

7. If the vehicle does not have a rear seat and the

child restraint has a top tether, follow the child
restraint manufacturer's instructions regarding the
use of the top tether. See Lower Anchors and
Tethers for Children (LATCH) on page 2‑49
for
more information.

8. Push and pull the child restraint in different

directions to be sure it is secure.

If the vehicle is equipped with a passenger sensing
system, and when the passenger sensing system has
turned off the right front passenger frontal airbag, the off
indicator in the passenger airbag status indicator should
light and stay lit when you start the vehicle.

If a child restraint has been installed and the on
indicator is lit, see “If the On Indicator is Lit for a Child
Restraint” under Passenger Sensing System on
page 2‑86
for more information.

To remove the child restraint, unbuckle the vehicle
safety belt and let it return to the stowed position. If the
top tether is attached to a top tether anchor,
disconnect it.

Securing a Child Restraint in the
Right Front Seat Position (With
Airbag Off Switch)

This vehicle has airbags. A rear seat is a safer place to
secure a forward-facing child restraint. See Where to
Put the Restraint on page 2‑48
.

There may be a switch in the glove box that you can
use to turn off the right front passenger frontal airbag.
See Airbag Off Switch on page 2‑82 for more
information, including important safety information.

2-65

Advertising