CHEVROLET 2010 Express - Manual (Page 393)

Maintenance II
• Perform all services described in Maintenance I .
• Steering and suspension inspection. Visual
inspection for damaged, loose, or missing parts or
signs of wear.
• Lubricate the front suspension, kingpin bushings,
steering linkage, and rear driveline center splines.
• Engine cooling system inspection. Visual inspection
of hoses, pipes, fittings, and clamps and
replacement, if needed.
• Windshield wiper blade inspection for wear,
cracking, or contamination and windshield and wiper
blade cleaning, if contaminated. See Windshield
and Wiper Blades on page 6-106. Worn or damaged
wiper blade replacement. See Windshield Wiper
Blade Replacement on page 6-59.
• Body hinges and latches, key lock cylinders, folding
seat hardware, and rear compartment hinges,
linkage, and handle pivot points lubrication. See
Recommended Fluids and Lubricants on page 7-12.
More frequent lubrication may be required when
vehicle is exposed to a corrosive environment.
Applying silicone grease on weatherstrips with a
clean cloth makes them last longer, seal better, and
not stick or squeak.
• Restraint system component check. See Checking
the Restraint Systems on page 2-80.
• Automatic transmission fluid level check and adding
fluid, if needed. See Automatic Transmission Fluid
(4-Speed Transmission) on page 6-21 or Automatic
Transmission Fluid (6-Speed Transmission) on
page 6-24.
• All-wheel drive vehicles: Transfer case fluid level
check and adding fluid, if needed.
7-5