CHEVROLET 2010 Camaro - Manual (Page 273)

3. Turn the bulb socket
counterclockwise and pull
the bulb straight out of the
lamp socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the facia
opening until the clip is in place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Daytime Running
Lamp (Up-level
vehicles)
P13W
Fog Lamp PS24W
Front Park and Turn
Signal Lamp
3457NAK
Halogen Headlamp H13
License Plate Lamp W5W
Rear Turn Signal
and Taillamps
3157K
For replacement bulbs not listed
here, contact your dealer/retailer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load
is too heavy, the circuit breaker
opens and closes, protecting the
circuit until the current load returns
to normal or the problem is fixed.
This greatly reduces the chance of
circuit overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
the following in the vehicle:
• Headlamp Wiring
• Windshield Wiper Motor
• Power Windows and other Power
Accessories
Vehicle Care 9-41