Operating instructions, Starting your washer – Whirlpool 6LA6300xY User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
Starting your washer
Be sure to measure and add detergent, then place a sorted load in the washer before
starting it.
WATER SAVING
LOAD SIZE SELECTOR
ENERGY SAVING
TEMPERATURE SELECTOR
1. Select a load size
• Position the Load Size Selector at the
setting that describes the size of load
you want to wash.
• The selector can be set anywhere on
or between EX SMALL (a few small
items) and LARGE (a full load).
NOTE: For best washing results, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too low for your
wash load.
For best results with permanent
press clothes, use the LARGE
water level.
Reduce wash time when using EX
SMALL water level setting. Loads with
only a few small items need less wash
time for best results.
•
2. Select water temperature
• Match the water temperature to the
type of fabric and soils being washed.
• The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE: Use warm wash water with
the PERMANENT PRESS or KNITS
GENTLE Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.