Now start... with washer in laundry area, Preparation, Inlet hose connection – Whirlpool 3948875 User Manual
Page 3: Now start, Preparation: inlet hose connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
E
Now start...
With washer in laundry area.
level washer
DO NOT TIGHTEN
NUTS ON FRONT
LEGS UNTIL
WASHER HAS
BEEN LEVELED.
corrugated
section of
drain hose
Preparation:
Inlet hose
connection:
Use new hoses and washers that came with your washer.
4
Attach hose to bottom inlet
• valve opening first; then
second hose to top inlet, Tighten
couplings. DO NOT OVERTIGHTEN;
this could cause damage to couplings.
Elbow end of hoses attaches to
washer.
Inlets are plastic.
DO NOT STRIP OR
CROSSTHREAD.
' • Insert a flat washer into each end
of the inlet hoses. Check that washers are
firmly seated in couplings.
Panel B
Advertising