Before using your refrigerator, Clean it, Plug it in – Whirlpool 6ET18DK User Manual
Page 5: Install it properly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/662767/5/background.png)
BEFORE USING YOUR REFRIGERATOR
Before Using Your
Refrigerator
In This Section
Page
Page
Clean it............................................ .................... 5
Install it properly.................... ..........................5
Plug it in.......................................... .................... 5
Level it..................................... ..........................6
It is important to prepare your refrigerator for use. This section will tell you how to clean if, connect it to
a power source, install it and level it.
Clean it
Clean your refrigerator before using it, if neces
sary. See cleaning instructions on page 14.
Plug it in
Recommended Grounding Method
A 220 or 240 Volt, 50 Hz., AC only 15 or 20
ampere fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance be
provided. Use a receptacle which cannot be
turned off with a switch or pull chain. Do not use
an extension cord.
Install it properly
1. Allow 1.25 cm {'A inch) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
3. The refrigerator can be flush against the back
wall.