Select cycle and wash time, Start the washer, Select cycle and wash time; 3. start the washer – Whirlpool LASOOXM User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
permanent
press
l a r g e c a p a c i t y
7 S P E E D 4 C Y C L E
P e r m a n « n l P r e s s
COOL DOYvS Care
Select CYCLE and WASH TIME;
3. Start the washer
A.
Push in the Control Knob and
turn it to the right. It must be
pushed in and turned only
clockwise.
WJ
start the washer by pulling out
the Control Knob. The washer
will fill to the level you set with
wash water of the selected
temperature. After filling, the
washer will agitate for the
selected number of minutes.
B.
Stop on a number in the cycle
you want. The numbers are
minutes of wash time. The
drawing shows 8 minutes of
agitation in the REGULAR HEAVY
Cycle.
WJ
D.
To stop the washer at any time
push in the Control Knob. To
restart the washer, pull out the
Control Knob.
To set the controls for a rinse and
spin, a drain and spin, or a soak
or pre-wash, see page 8.