Starting your dryer, Select, Cycle and tiivie – Whirlpool LT5009XM User Manual
Page 11: Push the start button, To stop and •3. restart the dryer, Changing a setting, Cycle and tiivie push the start button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your dryer
Before starting your dryer, be sure laundry is sorted and loaded
properly (see your "Laundry Guide"). Be sure the door is tightly closed.
Select
1
.
CYCLE and TIIVIE
Push the
START Button
regular ^
Turn the Control Knob either way to
point to the time setting you want in
the cycle you want.
The dryer will start tumbling when
you push the START Button
To stop and
•3. restart the dryer
4
.
Changing a setting
The setting can be changed atony
time by turning the Control Knob to a
new setting.
To stop, open the door (or turn the
Control Knob to OFF).
To restart, close the door and push
the START button.
The Cycle Control Knob should point to OFF when the dryer is not in use.