Loading your washer, Installation, Loading your washer - installation – Whirlpool LC4500XK User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Loading your

Washer -

Installation

f or best wasninresults and

energy savings sodtlie loundry
carefully.
1. Sort the Laundry into Loads.

• Group the launC'V i 'to oadsthat

can be v/ashed and dried together.
See the Laundry G jiae- tor informa­
tion and samples of tv oical loads.

• Try to mix large cmd small items for

best movement in the washer.
2. Measure Detergent; Add to

Washer Basket.

• See detergent i 'foi idion on

page 6 andinSertio' iVofthe

Laundry Guide

• Add dry Dleacri crwater condi­
tioner (not fabric softener) if used.

Follow the package directions
carefully.
3.

Dilute Liquid Bleach Before Add­

ing to the Washer Basket.

• See the "Laundry Aids' section of

the Laundry Guide for more

information

4. Load the Washer.

• Spread the load evenly. (For exam­
ple. don't put all the towels on one
side and a few wash cloths on the
other.) An unbalanced load can
cause the washer to shake during
spinning.

• Load without packing so items can

move freely for best cleaning and
least wrinkling

5.

Add Diluted Fabric Softener Only

to the Deep Rinse Cycle.
• DO NOT ADD FABRIC SOFTENER TO

TFIE WASH. Fabric softeners often
combine with soap or detergent to
make sticky lumps or greasy stains.

V cur washer is a compact

automatic washer, not a portable. It is

smiled very 'nuch like a full-sized

toe Instohation Instructions" give

olete intoMTiation. To get the safest

;nd best use froi^i your washer, those

struct ons must be followed exactly.

' plumbing and electrical wiring

r'iust rrieet local codes and the
iseeas of the washer.

3 Prong
G'Ounding Type

L 'ne foam shipping block In the

washer basket and the two shipping

bolts under the washer must be
removed.

Control Dial

The four leveling legs must be

nstalled and adjusted so the washer

IS level
The water inlet and drain hoses must
be Installed tightly and correctly to
ovoid leaks

Advertising