Starting your washer, Select a load size, Select – Whirlpool LA6053XS User Manual
Page 4: Water temperatures, Load sizes and water levels, Operating instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
WATER SAVING
LOAD SIZE SELECTOR
ENERGY SAVING
TEMPERATURE SELECTOR
1. Select a LOAD SIZE
Turn the knob to point at a setting
that describes the size of load you
want to wash.
' Set the knob anywhere on or be
tween EX SMALL (a few items) and
LARGE (a full load).
NOTE: Use the LARGE water level
for best permanent press results.
^ Select
2.
WATER TEMPERATURES
COLO
• Select wash and rinse water tem
peratures .
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your “Laundry Guide.’
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate ^
fill with load.
LARGE
MED
CAUTION:
DO NOT
OVERLOAD WASHER.
(17.3 gals./65.5 L)*
(13.4 gals./50.8 L)*
EX SMALL
(9.5 gals./3ó.0L)*