To select 3, Wash water temperature, To select a – Whirlpool LA3300XP User Manual
Page 5: Water level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To select 3
2.
WASH WATER TEMPERATURE
HOT WATER can be selected only
in the REGULAR HEAVY Cycle. Turn the
Control Knob to 12 or 14 minutes in the
REGULAR HEAVY Cycle.
All rinses use cold water. This saves
energy and helps prevent wrinkles
trom setting into tabrics.
WARM WATER can be selected by
turning the Control Knob to 8 orlO min
utes in the REGULAR HEAVY Cycle
• A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 or 8 minute setting in that cycle.
To select a
3.
WATER LEVEL
HIGH WATER LEVEL. The washer will
automatically fill to its highest level,
(about17.2 gals./65.1 L), when the
Control Knob points to a FILL area
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets it
for a shorter wash time.
1. Push the Control Knob in and turn it
clockwise to a FILL area in the cycle
you want,
2. Pull the Control Knob out; the washer
will start to fill.
3. When the washer reaches the de
sired water level, push In the Control
Knob and slowly turn it past the FILL
area. Pull out the Control Knob to
start the washer.
For all rinses, the washer fills to Its
highest level with cold water.