Adding liquid chlorine bleach, Adding liquid fabric softener, Adding liquid fabric – Whirlpool 3363565 User Manual

Page 10: Softener

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Adding liquid chlorine bleach

Use your washer’s liquid chlorine bleach

dispenser to add bleach to the wash load.
Always measure liquid chlorine bleach. Do

not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with lower

water level settings. Follow manufacturer's
directions for safe use. Use a cup with a

pouring spout to avoid spilling.

1. Load the washer.

2.

Pour measured chlorine bleach carefully

into the dispenser. Do not let bleach
splash, drip, or run down into washer
basket. Undiluted bleach will damage any
fabric it touches.

3. Start the washer. Bleach will be diluted

automatically during wash part of cycle.

NOTE:

Do not use this dispenser to add

powdered chlorine or color safe bleach to
your wash load. The dispenser is for liquid
chlorine bleach use only.

Adding liquid fabric softener

• Always dilute fabric softeners with

Vz

cup

(125 mL) to 1 cup (250 mL) warm water.

Undiluted fabric softener can stain fabrics.

• Add diluted fabric softener only in the final

rinse.

• Fabric softeners should not be mixed with

other laundry products because greasy
stains may form. If stains form, remove by
wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the

stained item.

• Too much fabric softener can make some

items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener, or

do not use it every time.

10

Advertising