Whirlpool Roper RAL6245BL0 - Manual (Page 9)

OPERATING YOUR WASHER
What happens in each cycle
After agitation starts, the Cycle Control Knob
turns clockwise until It points to OFF and the
cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi­
ately after filling; agitation can occur with the
washer lid up or down.
NOTE: Wash agitation speed is reduced
during the last few minutes of wash agitation in
the Heavy, Regular, and Permanent Press
cycles. This helps protect your fabrics.
WASH RINSE
...
Fill Fill
№
1 Wash selected time Rinse
Drain (or partial drain*)
No agitation
Drain-No agitation
'The Permanent Press cycle partially Spin-Spray rinse
drains, fills, agitates briefly, and drains.
1A
Spin Spin
Off