Starting your washer – Whirlpool LA7899XP User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer;
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
• Turn the knob to point at a setting
that describes the size of load you
want to wash.
• Set the knob anywhere on or be
tween HAND WASHABLE (a few small
items) and EX LARGE (a full load).
See your "Laundry Guide” for details
on load sizes.
NOTE: Use the EX LARGE water
level for best permanent press
results.
• Select wash and rinse water tem
peratures by pushing a button.
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide!’
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
ciothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
’Approximate
fill with load.
o
CAUTION:
DO NOT
OVERLOAD WASHER.
EX LARGE (21.7 gals./82.1L)*
MEDIUM (16.4 gals./62.1L)*
HAND WASHABLES (11.9 gals./45.0L)*