If your washer does not spin, If your washer stops, During a cycle – Whirlpool LA5550XP User Manual
Page 14: If washer fills and drains, Without running, Before calling for assistance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If you need service or assistance, we suggest
you follow these four steps:
1. Before calling for assistance-
Performance problems often
result from little things you can find
and fix yourself without tools of any
kind.
IF YOUR WASHER DOES NOT FILL:
• Is the power supply cord plugged
into a live circuit with the proper
voltage?
• Have you cheoked your home's
main fuses or circuit breaker box?
• Are the water supply hoses
kinked?
• Is the Cycle Control Knob set and
pulled out?
IF YOUR WASHER DOES NOT SPIN;
• Is the lid closed?
• Is the power supply cord plugged
into a live circuit with the proper
voltage?
• Have you checked your home's
main fuses or circuit breaker box?
IF YOUR WASHER STOPS
DURING A CYCLE:
• Remember, the washer pauses
briefly at different times in each
cycle. These pauses are normal.
IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:
• Make sure that the Cycle Control
Knob is pointing to a number in
the cycle.
MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN
THE WASHER. IF IT ISN’T...
• The washer may seem to be
draining during wash and rinse
cycles.
• Water can siphon out. (See "In
stallation Instructions")
Are both water faucets open?
14