Removing the crisper and crisper cover, Adjusting the crisper humidity control – Whirlpool ED22DC User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4.
Replace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift
front of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
Pull out to the
stop, lift the front
and pull again.
Lift the cover
front, then
the back.
Adjusting the crisper humidity control
You can control the amount of humidity in
the moisture-sealed crisper.
• The control can be adjusted to any setting
between LOW and HIGH.
• LOW (open) lets moist air out of the
crisper for best storage of fruits and
vegetables with skins.
• HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
11