Operating instructions, Starting your washer, Select a load size – Whirlpool LA5330XS User Manual
Page 4: Select, Water temperatures, Load sizes and water levels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/662887/4/background.png)
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
1
.
Select a LOAD SIZE
• Turn the knob to point at a setting
that describes the size of ioad you
want to wash.
• The water ievei can be set for
EX SMALL (a few items), MED or
LARGE (a fuli ioad).
NOTE; Use the LARGE water level
for best permanent press results.
^ Select
2.
WATER TEMPERATURES
CO
l
C -
c
CO
l
E • CO
l
C
iOà
e Match the wash and rinse water
temperature to the type of fabrics and
soiis being washed.
• Ali rinses are coid. Coid rinses save
energy and heip prevent wrinkies from
setting into fabrics.
Recommended wash temperatures
can be found in your "Laundry Guide.”
IMPORTANT: Use warm water with
the PERM’T PRESS or SHORT cycles.
For heavily soiled permanent
press or knit clothes, pre-wash or
pre-soak before washing in warm
water.
LOAD SIZES AND WATER LEVELS
For best cleaning resuits, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
‘Approximate "H z '
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE (17.3gals./65.5L)‘
MED (13.4gals./50.8L)*
EX SMALL (9.5 gals./36.0 L)‘