Whirlpool LLC7244BQ0 - Manual (Page 6)

O P E R A T I N G Y O U R W A S H E R
Selecting a load size
Your washer has a knob or slide Load Size
Selector. Position the Load Size Selector at the
setting that corresponds to the size load you
want to wash.
Select a load size based upon the size of the
load and the fabric you are washing. See page
14 for additional loading information.
• If your washer has a knob Load Size Selec
tor, turn selector to the desired load size.
• If your machine has a slide Load Size Selec­
tor, you may set the load size anywhere on or
between the small and ex large settings.
To change the load size setting after the washer
has started to fill, move the Selector to the
desired new setting.
NOTE: If your washer has RESET on the Load
Size Selector, change the load size selection by
first moving the Selector to RESET, then to the
new load size.
Load size tips
• Items should move freely in the washer. Do
not overload the machine or select a load size
that is too small for the wash load.
• Use a large load size setting for best results
with permanent press clothes.
Slide selector with 'Reset*
• Reduce wash time when using a small load
! ize setting. Loads with only a few small
I ems need less wash time.
Selecting wash-rinse temperatures
Your washer has a knob, CLEAN TOUCH™ or
push button Water Temperature Selector. Match
the water temperature to the type of fabric and
soils being washed. The top temperature is the
wash water and the bottom temperature is the
rinse water.
□ □□□
Knob selector
NOTE: The Regular cycle features all cold
rinses.
See the “Water usage guide” on page 18 for
more information.
CLEAN TOUCH selector-
an indicator appeers
above the water tempera­
tures selected
II
I 'ush button selector