If washer/dryer does not operate, When moving the washer/dryer, If you need assistance – Whirlpool 3397612 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If washer/dryer does
not operate...
Check the following to be sure that:
1. Electrical supply is connected.
2. House fuse or circuit breaker is intact
and tight.
3. Washer lid or dryer door is closed.
4. Controls are set in a running or "ON"
position.
5. Dryer start button has been firmly
pushed.
6. Three shipping straps have beeh
completely removed.
When moving the
washer/dryer...
• Disconnect the power supply cord,
then tape securely to the
washer/dryer.
• Tape the drum to the front panel.
Tape the lint screen in place. Tape
the dryer door closed.
• Wedge a blanket between the
laundry tub ring and cabinet top to
restrict tub movement.
• Turn front leveling legs all the way in.
If you need assistance...
Check your Use and Care Guide for a toll
free number to call, or call the dealer from
whom you purchased this appliance. The
dealer is listed in the Yellow Pages of your
phone directory under "Appliances —
Household — Major — Service and Repair."
When you call, you will need the
washer/dryer model number and serial
number. Both numbers can be found on
the model/serial rating plate located
behind the dryer door on the dryer door
well.
Part No. 3397612
©1995
Benton Harbor, Michigan 49022
Printed in U.S.A.