What happens in each cycle, Regular cycles, R5ft – Whirlpool 3360461 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
What happens in each cycle
When the Cycle Control Knob is set to a
Permanent Press cycles
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
Regular cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
k......
Fill
W
Rinse
Drain-No agitation
Spin-Spray rinse
5ft
Spin
A
Off
k..
Fill to selected load size
Wash selected time
♦
Partial drain-No agitation
^.
Fill to selected load size
m
Brief agitation
Drain-No agitation
5ft
Spin
h
Fill
№
Rinse
Drain-No agitation
r5ft
Spin-Spray rinse
5ft
Spin
A
Off
10