Exterior moisture controi, Adjusting the refrigerator shelves, Adjusting the shelf and bin glides – Whirlpool 6ET18RK User Manual
Page 6: Exterior moisture control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Refrigerator
Continued
EXTERIOR
MOISTURE
CONTROL
Slide glide
along track.
Exterior moisture controi
The Exterior Moisture Control on the Control
Console operates electric heaters around the
door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To remove shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
Lower front of shelf to level position.
Adjusting the shelf and bin glides
The shelf or bin glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along track.
Shelf glides cannot be removed.